Buna Nitrile
Low-Leakage Fans
Canadian Blower is a world wide distributor of industrial process ans OEM fans and blowers, as well as fan components; including high pressure blowers, high temperature fans, spark resistant and explosion proof ventilators, tubeaxial and vaneaxial high pressure ventilators. Canadian Blower also does existing fans and blowers repairs, re-build, as well as dynamical wheels balancing.
Canadian Blower designs low leakage and gas tight blowers and fans for containment of hazardous inorganic and organic compounds in industrial manufacturing plants and other critical applications. Special alloy construction and shaft sealing devices are available for blower service requiring zero or minimal gas leakage into and out of casing.
Specific code welding processes and special fan design features are used too – to ensure complete gas tight integrity.
Zero leakage and gas tight fans and blowers could be used in the following industries:
* Printing and Converting
* Chemical Plants
* Pollution Control
* Pulp and Paper Industry
* Food Processing
* Paint and Ink Industries
* Power Generation
* Research and Development
* Petroleum
Some special alloys and materials frequently used in gas tight fans, especially for service in hazardous, abrasive, corrosive and high temperature environments, include:
Corten, ASTM A36 Carbon Steel, Hastelloy, Inconel, Stainless Steels of different kinds, Titanium, Monel, Aluminum, Teflon, Rubber Lining - these materials are typical for industrial applications requiring high strength alloys and super alloys too.
As an intermediate step between standrard fan design and air-tight design, Canadian Blower offers a few stages of low leakage construction on fans and blowers – for industrial cusomers calling to minimize leakage fans due to the presence of toxic or corrosive gases in the airstream. As some system requirements are more stringent than others, and since some of the necessary modifications can be rather expensive, a few levels of Low Leakage Fan Construction are offered to choose from:
1) Contiunuosly welded fan housings;
2) Gas-purged mechanical shaft seals in lieu of lip seals – for greater sealing capability at the shaft hole opening;
3) Heavy gauge housing construction with solid housing drive side, Neoprene Gasketing, and Viton, or Buna-N Rubber lip type shaft seal;
4) Full face sheet gasketing, Red Silicone or White Nitrile.
In order to achieve a proper sealing, the mechanical shaft seal should be purged. The recommended purge pressure is 2 to 5 PSI above the process gas pressure.
Lip seals are furnished with two seal elements, each with a stainless steel spring for maintaining surface contact. The seal assembly is lubricated with” never-seeze”. Mechanical seals are double or triple carbon ring seals mounted in a carbon steel housing. The seal housing is furnished with two purge ports.
To ensure proper fan sealing, Soap Bubble or Chalk / Kerosene tesing of the blower assembly is performed. This ensures that continuous weld has completely sealed the housing seams (liquid tight).
Canadian Blower has a lot of experince with gas tight and zero leakage construction on fans and blowers, including: multistage lip shaft seals; Buna-N, Viton and Teflon seals; mechanical shaft seals; special fan housing gasketings; single and double carbon ring seals; hermetically sealed blowers; magnetofluidic and ferrofluidic seals; and packed stuffing boxes with barrier liquids and purgeable seals.
For additional information please refer to http://www3.bell.net/olegtechetchel/blower_fan/index.html.
Oleg Chechel
Developer of Industrial Process Ventilation Equipment
Canadian Blower
http://www3.bell.net/olegtechetchel/air_blower/index.html
http://www3.bell.net/olegtechetchel/air_fan/index.html
About the Author
Oleg Chechel
Developer of Industrial Process Ventilation Equipment
Canadian Blower
http://www3.bell.net/olegtechetchel/air_blower/index.html
http://www3.bell.net/olegtechetchel/air_fan/index.html
Nicolae Palit – Buna-i piinea-n tara mea
|
|
75 Buna/Nitrile Paintball Co2 Tank O-rings – 90 DURO O-Rings $4.00 |
|
|
50 Black Paintball Tank O-Rings, Buna/Nitrile- 90 DURO C02, HPA, N2 Tank ORings $6.50 |
|
|
50 Buna/Nitrile Co2 Tank O-rings – 90 DURO O-Rings $3.00 |
|
|
25 Buna/Nitrile Co2 Tank O-rings – 90 DURO O-Rings $2.00 |
|
|
5 pk Paintball Tank O-Rings Buna/Nitrile-90 Duro ORings $0.99 |
|
|
50 Buna/Nitrile Co2 Tank O-rings – 90 DURO O-Rings $3.00 |
|
|
12 Buna/Nitrile Paintball Fill Nipple O-Rings – 90 DURO O-Rings $1.50 |
|
|
20 Paintball Tank O-Rings, Buna/Nitrile-90 DURO ORings! $3.99 |
|
|
25 Buna/Nitrile Paintball Tank Quick Disconnect O-rings – 70 DURO O-Rings $2.25 |
|
|
25 Buna/Nitrile Paintball Fill Nipple O-Rings – 90 DURO O-Rings $2.00 |
|
|
12 Buna/Nitrile Delta 68/12 Gram Co2 Cartridge Seals – 90 DURO O-Rings $1.50 |
|
|
Buna/Nitrile 6 Each – Paintball Fill Nipple & Quick Disconnect O-rings – 12PK $2.00 |
|
|
Buna/Nitrile 15 Each – Paintball Fill Nipple & Quick Disconnect O-rings – 30PK $5.50 |
|
|
Buna/Nitrile 12 Each – Paintball Fill Nipple & Quick Disconnect O-rings – 24PK $4.00 |
